Push Rod Tubes
for T150T, T150V & T160
Stainless steel push rod tubes to suit the small heath built T150v and T160
with the long spigot for deep push rod tube recess rocker boxes.
The short spigot version is also available for the earlier T150
and Rocket 3 rocker boxes.
They are available for £39.00 each + P&P
Part Numbers:
Type A: PRTA-046 / Type B: PRTB-047
Air Filter Intake Sleeves
Made in the late 1960's by Amal with a thread cut in them and fitted to the early Triumph and BSA Triples, these have been unavailable for many years.
These faithful reproductions of the originals are manufactured in stainless steel and are a fantastic addition to your bike with the added benefit of not falling off when you remove the air filter!
They are available in sets of 3 for £39.00 + P&P Part Number: AFIS3-587
or individually at £13.00 each + P&P Part Number: AFIS1-587
Indicator Arms for T150 & T160
Made from highly polished Stainless Steel and supplied complete with all fixing nuts, washers, etc.
T150
Front - £35.50 per pair + P&P
Part Number: IA-646
Rear - £30.50 per pair + P&P
Part Number: IA-647
T160
Front - £38.50 per pair + P&P
Part Number: IA-648
Rear - £30.50 per pair + P&P
Part Number: IA-649
Air Filter Box Adapter Screws for T150 & T160
Made from highly polished stainless steel to fit T150 & T160, these easy to access screws
hold the air filter boxes helping anyone wishing to avoid this usually awkward job.
T150
£39.50 per pair + P&P
Part Number: AFBAS-067
T160
£39.50 per pair + P&P
Part Number: AFBAS-068
Triumph T160 Idle Extension
A much needed extension to the idle screw. Manufactured in highly polished stainless steel, it has been designed and made in partnership between 3D Motorcycles and Clive Scarfe Systems. It enables the adjustment of the tick over without burning your hands or needing a spanner and takes just minutes to fit with no modifications.
£89.50 + P&P
Part Number: T160IE-041
Triumph Headlight Brackets for T160, T140 & T150V
Highly polished stainless steel faithful reproductions of the originals.
T160
L/H 97-5056 £39.75 + P&P
Part Number: THB-028
R/H 97-5057 £39.75 + P&P
Part Number: THB-029
T140 / T150V
L/H 97-4417 £47.50 + P&P
Part Number: THB-026
R/H 97-4203 £43.00 + P&P
Part Number: THB-027
Triumph Fork Headlight Shrouds for T160 & T150V
Faithful reproductions of the originals in highly polished stainless steel.
In our opinion, far superior to the original chromed items!
£48.00 each + P&P
Part Number: TFHS-037
Plain Shrouds
£39.50 each + P&P
Part Number: TFHS-038
Triumph Trident & Rocket 3 Hinged Piston Ring Clamps
These have been unavailable for many years but are a must have addition to any Triple owner's tool kit. They are faithful reproductions of the originals.
£48.00 per set of three + P&P
Part Number: HPRC-886
Triumph T150, T150V, Rocket 3 Mk 1 & Mk2, and Hurricane
Centre Carburettor Tickler Kit
The problem of tickling the centre carb on the T150/T150V, Rocket 3 MK1, Rocket 3 MK2 and the Triumph Hurricane has finally be solved! Our kit takes minutes to fit with no holes to drill and is made from stainless steel.
Late type (A)
£72.00 per kit + P&P Part Number: CCTKA-285
Early type (B)
£72.00 per kit + P&P Part Number: CCTKB-287
T160 Tickler Operating Arm
The operating arm is the same as the T160 part no: 71-4360
& can be sold separately for those wanting an upgrade.
£20.50 + P&P Part Number: CCTOA-288
T160 Sprocket Conversion Kit
A collaboration between Clive Scarfe Systems and Classic Triumph (www.classic-triumph.com) has made these items now available to the UK and European markets.
Due to high demand we are now offering the Triplex shock absorber sprocket and Triplex engine sprocket as a pair.
We understand that customers have brand loyalty and with so many primary chains available on the market, such as the 82 link 3/8" x 7/32" Triplex by Tsubaki, Regina, etc., Clive Scarfe Systems has decided not to include one in the kit. Customers are required to source their own primary chain.
Fitting Service
Clive Blake, who has worked on Triples for many years, will be offering a service for fitting this kit and any other work you may wish to have carried out on your bike, at Clive Blake's own workshop on the Kent/East Sussex borders. Contact us to get in touch.
Beware of copies
It has come to our attention that copies of our Triplex shock absorber sprocket are appearing, please be aware that our sprocket has undergone rigorous testing for many miles on numerous T160s worldwide and it has been manufactured to the exacting standards you can expect from www.classic-triumph.com.
The cost of this Sprocket Conversion Kit is £250.00 plus post & packaging.
Part Number: SCK-352
Triple Rebuild DVD (+ free MP4 Download)
Classic Triumph (www.classic-triumph.com) and Clive Scarfe Systems have now made this item available to the UK & EU.
This DVD covers everything you could need to know in order to overhaul or rebuild your Triumph / BSA Triple engine and it's peripherals.
It clearly explains, in 'Layman's terms', how to set up your clutch for perfect action and lift, how to perfectly align your primary drive and how to balance the clutch and shock absorber units for minimum run-out.
There is also a chapter on fitting Classic Triumph's excellent T160 Triplex Primary Conversion, which can be invaluable when faced with the daunting task for the first time.
This is a 'must have' for both the new Triple owner and the seasoned one alike. It is a fantastic addition to your toolbox!
£29.00 + P&P
Part Number: TRDVD-083
Late type Petrol Tank
Early type Petrol Tank
Triumph T150/T150V Late & Early Tank Centre Straps
There are no replacements, new old stock or re-manufactures for the centre aluminium extrusion strip on the T150V European petrol tanks. To make a faithful reproduction of the original strap would have cost thousands of pounds and would not be cost effective so Clive Scarfe Systems has come up with a great alternative!
They are made from 0.7mm Stainless Steel and come complete
with rubber backing and all fixing screws.
Late type (A) - £114.00 each + P&P Part Number: LTCS-365
Early type (B) - £134.00 each + P&P Part Number: ETCS-365
Triumph T150 Plain Tank Centre Straps
These straps are made from highly polished stainless steel and are provided complete with rubber under mat and fixing screws.
Late type (A) with or without holes - £44.00 each + P&P Part Number: LTCS-366
Early type (B) with or without holes - £52.00 each + P&P Part Number: ETCS-366
Triumph T150/T150V Matt Black Tank Centre Straps
There are now 3 types of tank straps to choose from to fit the Bread bin petrol tank of the Triumph Trident T150/T150V.
This strap is made from 1mm aluminium, is powder coated matt black and comes complete with backing rubber & fixing screws.
Late type (A) - £86.00 each + P&P Part Number: LTCS-367
Early type (B) - £110.00 each + P&P Part Number: ETCS-367
All Exhaust Systems
• Please call to see what is available.
Triumph T150, T160 & BSA UK Rocket 3 Mk2
Oil Cooler Brackets
• Made from highly polished stainless steel.
• Used original factory N.O.S. parts for measurements.
£32.00 per pair + P&P Part Number: OCB-937
Oil Cooler Bracket Corner Rubbers
It has been brought to our attention that there is a variation in the thickness of oil cooler bracket corner rubbers on the market, this in turn makes the simple task of fitting the brackets a problem. We have sourced and can now supply the correct length and thickness for the factory style bracket.
£7.50 per set of 8 + P&P Part Number: OCB-939
Triumph X75 Hurricane & BSA US Rocket 3 Mk1
Oil Cooler Brackets
• Made from highly polished stainless steel.
• Used original factory N.O.S. parts for measurements.
• Comes with rubber grommets fitted.
£39.50 per pair + P&P Part Number: OCB-938
Triumph T150 Cover for Alternator Leads
• Highly polished stainless steel.
• Part No. 70-8757
£39.50 each + P&P Part Number: CAL-702
Cush Drive Repair Kit
• Simple cost effective solution.
• As sold by Classic Triumph
• For Installation Video, click HERE.
£29.50 per set + P&P Part Number: CDRK-461
Air Filter Boxes
• Highly polished stainless steel.
• To fit T150 and Rocket 3 Mk1 & Mk2.
• 2mm inner panel to stop distortion when fixing
...to carburettor assembly unit.
• Designed for L.P.Williams filters (filter not included).
T150 - £104.00 + P&P Part Number: AFB-227
Rocket 3 Mk1 - £139.00 + P&P Part Number: AFB-228
Rocket 3 Mk2 - £112.00 + P&P Part Number: AFB-229
T150
Rocket 3
MK2
Rocket 3
MK1
Air Filter Boxes - Bands
• Highly polished stainless steel.
• Half perforated band.
• Heavy duty 2mm Claw Clamps.
• Built to same measurements as original, so fits
...both T150 and Rocket 3 Mk2.
• Designed for L.P.Williams filters (filter not included).
£45.00 + P&P Part Number: AFBB-230
T160 Rear Chain Adjusters
• Highly polished stainless steel.
• All bolts and lock nuts supplied (stainless steel).
• As factory, allowing full adjustment of the rear chain.
• Must use your existing 83-5870.
£43.00 per pair + P&P Part Number: RCA-482
Dave Madigan Starter Motor Covers for T150, T160 and Rocket 3 Mk1 & Mk2
• Highly polished stainless steel.
• T150 cover requires customer to fit carb float bowl without
...the drain plug.
• For T160 and Rocket 3 customers, the drain plug can remain.
T150: £58.00 + P&P Part Number: DM-SMC-334
T160: £87.00 + P&P Part Number: DM-SMC-335
Rocket 3 Mk1 & Mk2: £71.50 + P&P Part Number: DM-SMC-336
T150
T160
Rocket 3
Starter motor covers for T160
Fits original Lucas starter motor
• Highly polished stainless steel.
• Made to original design.
£75.50 + P&P Part Number: SMC-337
Luggage Rack to fit T150 & T160 front disc model
• Highly polished stainless steel.
• Both racks fit straight into existing holes on standard mudguard.
• 280mm wide x 200mm long.
£92.50 + P&P Part Number: LR-017
Luggage Rack to fit Rocket 3 Mk2
• Highly polished stainless steel.
• Fits straight into existing holes on standard mudguard.
• 280mm wide x 200mm long.
£95.00 + P&P Part Number: LR-018
Mudguard Bracket
Due to the unavailability of the T160/T140 front mudguard bridge 97-5058, we have decided to manufacture a faithful reproduction of these in 2mm stainless steel.
£49.50 + P&P
Part Number: MGB-846
Tickover Adjustment Screw
A stainless steel polished knurled tickover adjustment screw and stainless steel spring to suit all Triumph Trident T150s and BSA Rocket 3s
£32.00 per set + P&P
Part Number: TAS-601
Headlamp Distance Spacers
A pair of polished stainless steel headlamp distance spacers to suit the T140 / TR7 Bonneville /Tiger / T150V and T160 Triumph Trident
£9.50 per pair + P&P
Part Number: HDS-834
Welcome to Clive Scarfe Systems
I’ve been designing and fabricating stainless steel Triumph T150 and T160
items over many years from my modest home setup in the East of England.
They have shipped all over the world as far as the USA and Australia.
All items are my own design and are well tried and tested.
Please feel free to contact me, using the details at the top of the page for
any enquiries and / or to place an order.
Mail order only. Please indicate part number(s) when ordering.